Repository navigation
Opencode become stuck all of a sudden. Does not launch anymore. #5485
Description
Description
Curious if uninstalling is safe. If not, how can I make sure that my config and conversations are kept after the process?
This is what is happening right now:
So I figured to just uninstall
I am running opencode in Windows 10, WSL 1.0 Ubuntu 20.14
OpenCode version
1.0.67
Steps to reproduce
No response
Screenshot and/or share link
No response
Operating System
Windows 10
Terminal
Warp
Metadata
Metadata
Assignees
Labels
No labels
Activity
github-actions commentedon Dec 13, 2025
This issue might be a duplicate of existing issues. Please check:
bun addget stuck #4682: OpenCode gets stuck when bun add gets stuck (can freeze indefinitely during initialization)Feel free to ignore if none of these address your specific case.
raymelon commentedon Dec 13, 2025
Well, apparently my opencode was updated to 1.0.142
It looks like the update caused the issue?
raymelon commentedon Dec 13, 2025
I decided to proceed with updating it to 1.0.125, but it also looks like it failed to detect the installed version.
raymelon commentedon Dec 13, 2025
This is bad. Despite updating to 1.0.152, it's still stuck.
rekram1-node commentedon Dec 13, 2025
hm that’s very strange
are you able to do:
opencode run hello
and pass print logs to that?
radomirml commentedon Dec 14, 2025
I have a similar issue since this morning. It looks like an issue with TUI - open code is just stuck and doesn't open:
This works:
opencode run hello --print-logsradomirml commentedon Dec 14, 2025
Ignore my comment - in my case the problem was full /tmp partition
CountElqyd commentedon Dec 15, 2025
This issue usually happens because of opencode autoupdating, which is why you see "No such file or directory"
You may add this to your opencode.json to prevent this from happening.
"autoupdate": false,acbk2b commentedon Dec 15, 2025
I have been having the exact same issue today (everything worked on Friday 12/12), very similar set up: Windows 11, Ubuntu 22.04 WSL 1.
opencodeopens on projects without actual code (i.e.markdownfiles), however coding projects hang as described in this thread.Disabling
lspsupport andautoupdateglobally yielded no change for me, unfortunatelyHowever, I was able to get
opencodeworking again when downgrading substantially (i.e.1.0.0)rekram1-node commentedon Dec 15, 2025
Can anyone having issue show me:
opencode run hello --print-logs --model opencode/grok-codeand we can see if stuff is hanging and where
acbk2b commentedon Dec 15, 2025
Output from my end, looks like in my case the corporate proxy my laptop sits behind is stepping on
opencode.ai(I can't access it in the browser. I was using theGitHub Copilotbackend before, which was working fineEdit: Ran with the wrong version, but shows the same on the latest (`
rekram1-node commentedon Dec 15, 2025
@acbk2b can you try the same with a copilot model?
opencode run hello --print-logs --model github-copilot/gpt-4.1acbk2b commentedon Dec 15, 2025
I get a
ProviderModelNotFoundErrorerror on that:25 remaining items
maxjust commentedon Jan 16, 2026
+1
Godlaa commentedon Jan 17, 2026
+2
Songze1019 commentedon Jan 19, 2026
Same issue, I noticed that opening opencode with VSCode,
these garbled characters have appeared with an "Aborted" .
rnwolfe commentedon Jan 22, 2026
I am having a similar issue. My open code just hangs indefinitely when trying to launch. FWIW, it still launches in other session (precisely, other tmux panes). It seems to occur anytime the launch would be the second running instance of opencode.
Per above, I tried
opencode run hellowith both grok-code and my default model (opus 4.5 via anthropic). Grok works, but not specifying model does not.The
opencode runwhere it hangs seems to loop indefinitely on:Version:
> opencode -v 1.1.31Works:
opencode run hello --print-logs --model opencode/grok-codeHangs:
opencode run hello --print-logs(default model, opus 4.5 via anthropic)AT120 commentedon Jan 24, 2026
Encountered same issue on arch. TUI broke after updating to 1.1.34. Rolling back to the previous version I had been using (1.1.25) did not help. Launching opencode with a vpn helped, and it has been working after that with a vpn disabled. Couldn't reproduce this issue again even after reinstall, so not sure what resource was the culprit
AT120 commentedon Jan 24, 2026
I was able to reproduce the issue again by running opencode in a docker container. In my case the problem was in models.dev. My provider apparently blocking access to this site, and opencode was not able to start without access to it
sanchez1337 commentedon Jan 28, 2026
I just had it happen on freshly updated homebrew version. Tried a couple of things which didn't work so eventually tried re-installing using script provided in the documentation which also didn't work.
Then opened Activity Monitor on macOS and searched for opencode; saw two processes so killed one of them and then hanging TUI session actually rendered.
EDIT: Screen capture:
MrMarble commentedon Feb 2, 2026
I'm having the same issue, fresh installed with the
curlscript, I'm under a VPN, runningopencoderesults in a blank screen, trying to run anyhellocommands with different models hangs:acbk2b commentedon Feb 9, 2026
@rekram1-node
I saw on some other threads that
.envfiles were causing issues, so I gave that a shot on my end.The projects I was having issues launching all had
.envfiles, renaming them to something like.env.bakallowedopencodeto launch successfully.I did also try modifying the file permissions (
0644,0755,0777), but that did not work on my end. I suppose that could be a WSL 1 specific quirk, or something like that.hvdute commentedon Feb 23, 2026
In my case it was because of this block in
opencode.json. When this is enabled, only one instance of opencode can be launched. The second one will hang.--print-logshows nothing.{ // "server": { // "port": 4096, // "hostname": "100.64.142.97", // "mdns": false // }, "autoupdate": false }bondtesty commentedon Mar 24, 2026
seems same here
xkuznetc commentedon Apr 18, 2026
Having same issue with (
1.4.0), just hangs on Fedora 43 KDE with all latest updates:kinfo:installed via Homebrew (
brew info opencode):and node: